| 項目Item | 單位Unit | 參數Data |
| 合模力Max. clamping force | KN | 3800 |
| 移模行程Max. opening force | mm | 680 |
| 拉桿有效間距（V×H）Space between tie bars | mm | 680×680 |
| 允許的模厚（min-max）Mould height | mm | 250-710 |
| 模板zui大開距Max. daylight | mm | 1390 |
| 液壓頂出力Ejector force | KN | 90.7 |
| 液壓頂出行程Ejector stroke | mm | 170 |
| 液壓頂出桿的總數Ejector quantity | | 13 |
| 螺桿的直徑Screw diameter | mm | 65 | 70 | 75 |
| 螺桿的長徑比Screw L/D ratio | L/D | 22.6 | 21 | 19.6 |
| 理論注射容積Theoretical shot volume | cm3 | 1061 | 1231 | 1413 |
| 注射質量（PS料）Plasticising weight（PS） | g | 966 | 1120 | 1286 |
| 注射壓力Injection pressure | Mpa | 203 | 175 | 152 |
| 理論注射速率（PS料）Theoretical injection rate（PS） | g | 308 | 357 | 410 |
| 塑化能力（PS料）Plasticising capacity（PS） | g/s | 50.6 | 60.5 | 71.5 |
| 螺桿驅動扭矩Screw torque | N.m | 2860 |
| 螺桿zui高轉速Max. screw rotate speed | r/min | 150 |
| 注射行程Injection stroke | mm | 320 |
| 移座推力Carriage push force | KN | 110.5 |
| 油泵電動機功率Pump motor power | KW | 37 |
| 油泵zui高壓力Pump pressure | Mpa | 16 |
| 料筒加熱功率Heating power | KW | 25 |
| 加熱區段Heating zone | | 5 |
| 機器的外形 （L×W×H）Size | m | 6.8×2.0×2.3 |
| 機器的凈重 Net weight | t | 15 |
| *型號International designation | | 3800-2150 |
